Advice for Assembly

Assembly Advice
 
Boxroombeds are generally assembled into rooms of  2 different types.
 
Some beds are installed into relatively spacious rooms or alcoves, where the bed can be assembled well away from any walls and then pushed into an alcove or just positioned somewhere in the room. Customers who are installing a bed into this type of room will be able to follow the standard instructions for your bed.
 
If, however, like a lot of customers, your bed is going into a room where the finished bed will be tight up against 3 walls, please follow the advice below (in conjunction with the instructions in the box) and this will help you construct your bed.
 
General Advice
 
The main problem with assembling a bed in a tight space is the long bolts which go through the end of the bed. The procedures below ensure that all long bolts are in place before the bed is placed into the tight position it is to be used in.
 
The way to do this is to assemble the long sides of the bed first, and then attach the 2 sides together using the shorter end rails.
 
Finer details for each of the bed types we provide are given below.
 
HiT beds (use advice in conjunction with assembly instructions provided)
 
To assemble a HiT single bed, assemble the sides of the bed first as below:
rear side - 2 x legs, 1 x slat support rail, 2 x safety rails (if ordered)
front side - 2 x legs, 1 x slat support rail
Then place the two sides roughly into position and attach  together using the end rails. 
Finally secure the slats in place using the screws provided.
 
To assemble a HiT midsleeper bed, assemble the sides of the bed first as below:
rear side - 2 x legs, 1 x slat support rail, 2 x safety rails
front side - 2 x legs, 1 x slat support rail, 2 x short safety rails, ladder assembly
Then place the two sides roughly into position and attach  together using the end rails. 
Finally secure the slats in place using the screws provided.
 
To assemble a HiT bunkbed, assemble the sides of the bed first as below:
rear side - 2 x legs, 2 x slat support rail, 2 x safety rails
front side - 2 x legs, 2 x slat support rail, 2 x short safety rails, ladder assembly
Then place the two sides roughly into position and attach  together using the end rails. 
Finally secure the slats in place using the screws provided.
 
To assemble a HiT loft bed, assemble the sides of the bed first as below:
rear side - 2 x legs, 1 x slat support rail, 2 x safety rails, 1 x lower rail
front side - 2 x legs, 1 x slat support rail, 2 x short safety rails, ladder assembly
Then place the two sides roughly into position and attach  together using the end rails. 
Finally secure the slats in place using the screws provided.
 
 
 
Trendy beds (use advice in conjunction with assembly instructions provided)
 
To assemble a Trendy midsleeper bed, first connect the 2 parts of the legs together to create full length legs (x4).
Then assemble the sides of the bed as below:
rear side - 2 x legs, 1 x slat support rail, 2 x safety rails
front side - 2 x legs, 1 x slat support rail, 2 x short safety rails, rail support leg
Then place the two sides roughly into position and attach  together using the end rails. 
Secure the slats in place using the screws provided.
Attach the ladder.
 
To assemble a Trendy bunkbed, first connect the 2 parts of the legs together to create full length legs (x4).
rear side - 2 x legs, 2 x slat support rail, 2 x safety rails
front side - 2 x legs, 2 x slat support rail, 2 x short safety rails, ladder assembly
Then place the two sides roughly into position and attach together using the end rails. 
Secure the slats in place using the screws provided.
Attach the ladder.
 
To assemble a Trendy loftbed, first connect the 2 parts of the legs together to create full length legs (x4).
Then assemble the sides of the bed as below:
rear side - 2 x legs, 1 x slat support rail, 2 x safety rails, 1 x lower rail
front side - 2 x legs, 1 x slat support rail, 2 x short safety rails, rail support leg
Then place the two sides roughly into position and attach  together using the end rails. 
Secure the slats in place using the screws provided.
Attach the ladder.
 
Stompa beds (use advice in conjunction with assembly instructions provided)
 
To assemble a Stompa single bed, assemble the sides of the bed first as below:
rear side - 2 x legs, 1 x slat support rail, safety rail (if ordered)
front side - 2 x legs, 1 x slat support rail
Then place the two sides roughly into position and attach  together using the end panels. The end panels need to be fixed with the 4No holes in the finished surface facing away from the wall so that the grub screws can be tightened using a screwdriver. The holes can then be covered using the stickers supplied. 
Finally secure the slats in place using the screws provided.
 
To assemble a Stompa midsleeper bed, assemble the sides of the bed first as below:
rear side - 2 x legs, 1 x slat support rail, 1 x safety rail
front side - 2 x legs, 1 x slat support rail
Then place the two sides roughly into position and attach  together using the end panels. The end panels need to be fixed with the 4No holes in the finished surface facing away from the wall so that the grub screws can be tightened using a screwdriver. The holes can then be covered using the stickers supplied.
Secure the slats in place using the screws provided.
Attach the ladder and front safety rail.
 
To assemble a Stompa loftbed, assemble the sides of the bed first as below:
rear side - 2 x legs, 1 x slat support rail, 1 x safety rail, lower rail
front side - 2 x legs, 1 x slat support rail
Then place the two sides roughly into position and attach  together using the end panels and lower rails. The end panels need to be fixed with the 4No holes in the finished surface facing away from the wall so that the grub screws can be tightened using a screwdriver. The holes can then be covered using the stickers supplied.
Secure the slats in place using the screws provided.
Attach the ladder and front safety rail.
 


Secure Credit Card Payments
  • Secure Credit Card Payments
  • Secure Credit Card Payments
  • Secure Credit Card Payments
  • Secure Credit Card Payments
  • Secure Credit Card Payments
  • Secure Credit Card Payments
Boxroombeds, 12 Burnt Stones Close, Sheffield, S10 5TS - Established 2003
Copyright © 2018 Boxroombeds - eCommerce by eShopFitters